How Long To Charge Arlo Pro Camera

Download Article

Arlo is a company that manufactures and sells abode security cameras. The batteries on their devices are simple to recharge. The easiest manner is connecting the camera to a wall outlet with an Arlo USB adapter. If you want to charge multiple batteries at in one case, utilise an Arlo power station. If you get through all the necessary steps only your battery won't charge, there are a few troubleshooting options you can try to successfully charge your camera.

1
Move the camera inside if you lot're using information technology outside. Even if you have a power outlet outside, don't accuse the battery outdoors. Bring it inside before plugging it in to charge.^[1]
- Choose a safety spot to accuse the camera where it won't be disturbed or stepped on. A countertop or table works best. Don't charge the camera on the floor unless information technology'south an out of the way spot.
2
Plug the USB charging cablevision into the camera and wall power adapter. The charging cablevision has 2 sides. The smaller side plugs into the back of the photographic camera. Flip the camera around and detect the slot for the plug. Then plug the larger side of the cablevision into the wall adapter.^[two]
- Simply employ Arlo products to accuse the battery. Other power units and cables won't work and could harm the camera or battery.
Ad
three
Plug the wall power adapter into a wall socket. When the bombardment is continued properly, the LED light on the camera blinks blue. Look for this blinking. Then leave the photographic camera to accuse.^[3]
- If the blinking annoys y'all, turn the photographic camera around or cover it with a towel while it charges.
- If the light doesn't glimmer, check your connection. Brand certain all the plugs are fully inserted.
4
Unplug the camera when the LED light turns solid blue. When the battery is fully charged, the bluish light stops blinking and turns solid. Monitor the photographic camera and unplug it when you see the solid blue light. And so reinstall the photographic camera where it was originally.^[4]
- Arlo camera batteries take 2-4 hours to charge, depending on how depression the battery was. Don't unplug it before the light turns solid or you'll have an incomplete charge.

1
Plug in the Arlo charging station. The charging station comes with a USB cable and a wall adapter. Plug the modest side of the cable into the charging station and the large side into the adapter. Then plug the wall adapter into an outlet.^[5]
- An Arlo power station comes separately from the cameras and base stations. You tin can become one from an electronics shop or online. Retrieve that batteries aren't included with the power station. You only become the charging port, cable, and wall power adapter.
- Make sure the power station is in a safety place where it won't get knocked over or stepped on.
- Only utilize Arlo products to charge the ability station. Other USB cables won't work properly.
2
Open up the bombardment compartment on the photographic camera. Wait for a small latch on the peak of the camera. Press the latch downwardly with your finger to unlock the battery compartment. While property the latch, use your other hand to lift up the meridian function of the camera and reveal the bombardment.^[vi]
- Concur onto the camera firmly while opening the compartment. It could slip out of your hands and break.
3

Press downwards the latch holding the bombardment in place and slide it out. The bombardment is held in place with a modest latch. Printing it down to gratuitous the battery. Then slide the battery out of the compartment.^[7]
4
Slide the battery into the charging bay until it clicks. The power station has 2 charging bays, 1 on each side. Take the battery and line information technology upward with the grooves on the charger. Insert its back side (the black function) into the bay. Press until you hear a click, meaning the battery is locked in place. ^[viii]
- Make sure the Arlo symbol is facing up on the battery. That's how you know the bombardment is facing the right direction.
- Insert another battery into the other side if yous want to charge 2 at the same time.
v
Leave the battery in until the LED light turns solid dark-green. While the battery is charging, the LED lite will be solid yellow. When it turns solid green, the battery is charged and you can remove it.^[9]
- The power station has a light for each bombardment. Look at the light closest to the bombardment to make sure you're checking the right ane.
- The battery will take 2-four hours to charge, depending on how low the charge was.
- If the LED blinks yellow, it means the battery is inserted but isn't charging. Try removing the battery and reinserting it, making sure the grooves are all lined up properly.
half dozen
Remove the battery past pressing it until it clicks. The click ways the battery is free. So slide information technology out carefully and insert it back into the camera.^[10]
- Don't lift the power station when you remove the battery. Information technology could fall out and break.

1
Check that your attachments are tight. All the plugs you lot insert should be snug. If your battery won't charge, check each zipper. Make certain the wall adapter is in the outlet, and the USB cable is connected to the adapter and charging unit.^[xi]
- Endeavour removing the cables and wiping off all the connection points with a dry rag. Sometimes grit prevents a proficient connection. Then plug everything back in.
2
Make sure you lot're using Arlo equipment. The batteries and power station won't work without Arlo cables and adapters. Your best bet is using the equipment that came with your camera or power station. These were manufactured and packaged by Arlo. If you lot bought pieces separately, expect for the Arlo logo on them.^[12]
- If you buy replacement cables and adapters from some other seller, check for the Arlo logo on them. Also look for a lightning bolt logo, which is the QC ii.0 icon, and an output listed at 9V===one.1A. These are all indications of Arlo-canonical adapters.
- If you're using the same cables and adapters that came with your product, then the equipment may be lacking. Contact Arlo for further help or a replacement. Their 24-hour technical help number is (408) 638-3750, or you tin visit the Contact section on their website at https://www.arlo.com/en-united states/online-store/contact-us.aspx##targetText=For%20technical%20support%20or%20warranty,twenty-four hour period%2C%207%20days%20a%20week.
3
Log into your Arlo account and see if the charging icon is there. If you're trying to charge the battery and the LED isn't lighting up, the light may be defective. Confirm if the camera is charging by logging into your Arlo account. If y'all encounter the charge icon on the homepage, the photographic camera is charging. If non, then something is wrong with the connection.^[thirteen]
- This option only works if you're charging your bombardment while information technology's still in the camera. It won't work if you lot're using the ability station.
four
Reset your photographic camera to its manufactory settings. Sometimes a software issue prevents the photographic camera from charging. Take your Arlo base station and find the Reset button on the dorsum. Printing that button in with a pen or paperclip and agree it for 10 seconds. The LED will and so wink yellowish, and the system reboots. This resets the system to its default settings. When the LED turns solid green, set your camera once more.^[14]
- After the base station reboots, select New System Setup from your online Arlo business relationship. Follow the steps to reconnect the photographic camera to your WiFi.
- If your battery nonetheless won't charge, contact Arlo for further support.